Cisco ASR 1000 network interface processor

Excl Vat.€18,777.80

Inc VAT.€23,096.69

Manufacturer part number ASR1000-ESP10=
Vendor Cisco
Call For Availability


The Cisco ASR 1000 Series Embedded Service Processors (ESPs) are based on the innovative, industry-leading Cisco QuantumFlow Processor for next-generation forwarding and queuing in silicon. These modules use the first generation of the hardware and software of the Cisco QuantumFlow Processor architecture.

The 5-, 10-, 10-N- 20- and 40-Gbps Cisco ASR 1000 Series ESPs (part numbers ASR1000-ESP5, ASR1000-ESP10, ASR1000-ESP10-N, ASR1000-ESP20, and ASR1000-ESP40, respectively) provide five centralized forwarding-engine options for the Cisco ASR 1000 Series Aggregation Services Routers. Additionally, the Cisco ASR 1002 Fixed Router includes a nonmodular, fixed ESP with throughput of 2.5-Gbps and the ASR 1001 comes with a nonmodular, fixed ESP with throughput of 2.5-Gbps which is upgradable with a software activated performance upgrade license to 5-Gbps.

The Cisco ASR 1000 Series 10-N-Gbps ESP (ASR1000-ESP10-N) is the nonencryption version of the Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10). The Cisco ASR 1000 Series 10-N-Gbps ESP can only support noncrypto Cisco IOS Software images and will never support encryption capabilities such as IP Security (IPsec). In future releases, the Cisco ASR 1000 Series 10-N-Gbps ESP may support secured network management features such as Secure Shell (SSH) Protocol, Secure Sockets Layer (SSL), and Simple Network Management Protocol Version 3 (SNMPv3).

The Cisco ASR 1000 Series ESPs are responsible for the data-plane processing tasks, and all network traffic flows through them. The modules perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3 forwarding, quality-of-service (QoS) classification, policing and shaping, security access control lists (ACLs), VPNs, load balancing, and NetFlow. They are also responsible for features such as firewalls, intrusion prevention, Network Based Application Recognition (NBAR), Network Address Translation (NAT), and Cisco IOS Flexible Pattern Matching.


Safety UL60950 & CAN/CSA-C22.2 No. 60950, AS/NZS 60950, IEC/EN 60950, 73/23/EEC
Electromagnetic compatibility AS/NZ 3548, EN55022, CISPR 22, EN55022, 47 CFR Part 15, VCCI V-3/01.4, CNS-13438, GR1089
Rack mounting N
Colour of product Multi
Full duplex Y
Ethernet LAN data rates 10, 100, 1000 Mbit/s
Management protocols Telnet (CLI), Console (CLI), SNMP v3
Web-based management Y
Packet memory 128 MB
Route memory 2 GB
Networking standards IEEE 802.3
Operating temperature (T-T) 5 - 40 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 5 - 85%
Storage relative humidity (H-H) 5 - 95%
Operating altitude -60 - 2000 m
Non-operating altitude -60 - 4000m
Operating temperature (T-T) 41 - 104 °F
Maximum data transfer rate 10 Gbit/s
Connectivity technology Wired
Compatible operating systems Cisco IOS XE 2.1
Mounting R
Connectivity LEDs 6
Slot type 2.5/5 - Gbps ESP
AC adapter included N
Internal memory 2560 MB
Built-in processor ASR1000-ESP10
Firmware upgradeable Y
DC-in jack N
I/O ports Cisco ASR 1000 SIP - SPA
Power consumption (typical) 140 W
Supported network protocols IPv6
Firewall security IOS
Security algorithms 3DES, DES, SSH, WPA-AES
MAC address filtering Y
VPN tunnels quantity 10000
Access Control List (ACL) Y
Memory and processor 512-Mbps Cisco QuantumFlow, 2-Gbps DRAM, 10-Mbps TCAM, 128-Mbps
Quality of Service (QoS) support Y
Compatibility Cisco ASR 1002, 1004, 1006
Dimensions (WxDxH) 428 x 369 x 23 mm
Dimensions (W x D x H) 23.4 x 424.2 x 360.4 mm (0.92 x 16.7 x 14.19")
Wi-Fi N

Alternative products

Excl Vat.€761.82

Inc VAT.€937.04

Excl Vat.€1,058.64

Inc VAT.€1,302.13

Excl Vat.€3,580.74

Inc VAT.€4,404.31

Excl Vat.€1,486.75

Inc VAT.€1,828.70

Recommended products


We use cookies and similar tools to enhance your shopping experience. By clicking "Accept" you agree to this.